Monday, December 22, 2014

Literal Wildlife Photographers: 19 Photos of Animals Getting Cozy with Camera Gear

SELFIE by Simon Roy on 500px

Hero Down.  Puffin To The Rescue. by Megan Lorenz on 500px

furry photographer... by Pavel Petrov on 500px

I'm a real professionist by Alberto Ghizzi Panizza on 500px

Image Stabilizer by Simon Roy on 500px
Rico and his camera by Gabriel Kosek on 500px

EVOLUTION by Simon Roy on 500px

Watch The Birdie 2 by Tony Flashman on 500px

Self Portrait by Simon Phillpotts on 500px

camera thief by Sebastian Luczywo on 500px

oohh, yeeaahh !! by Irawan Subingar on 500px

Posers! by Russell Savory on 500px

Lion and photo camera by Thomas Selig on 500px

Meerkat by Will Burrard-Lucas on 500px

New Assistants by Will Burrard-Lucas on 500px



Cheeky by Megan Lorenz on 500px


Excuse me can I have my camera back! by Lawrence G Photos on 500px



Selfie by Megan Lorenz on 500px



Hide and Seek by Dalia Kvedaraite on 500px




Source:
http://iso.500px.com/literal-wildlife-photographers-19-photos-of-animals-getting-cozy-with-camera-gear/?utm_source=500px&utm_medium=facebook&utm_campaign=dec15_12PM_literal-wildlife-photographers-19-photos-of-animals-getting-cozy-with-camera-gear





Wednesday, December 3, 2014

Product Spotlight: Canon Remote Control RC-6


A382CanonRC6

If you want a small, versatile, inexpensive remote shooting accessory, look no further than the Canon Remote Control RC-6. Despite its diminutive size (32 x 63.5 x 6.5mm), this device can be used for a number of different tasks.


Camera compatibility: EOS 5D Mk II, 5D Mk III, 6D, 7D, 60D, 300D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, M, 10, 100, 30, 30V, 33, 33V, 50, 50E, IX

The RC-6 is a wireless transmitter (infrared rather than radio waves). To work, it needs a receiver. Unlike wireless controllers, the receiver for the RC-6 is already built into a range of EOS models (see right). One reason the RC-6 is relatively inexpensive is that you are only buying half the system. You have already paid for the other half – if you have a compatible camera.

It is not possible to buy a separate receiver for the RC-6. If you do not have the right camera you will have to look at alternative methods for remote firing.

As you can see below, the sensor for the RC-6 is on the front of the camera (EOS 550D shown, but the sensor is in a similar position on other compatible cameras).Remcontrolsensor550D

The RC-6 has a small hole in the bottom left corner for attaching a lanyard (not supplied).

CanonRC6

Using the RC-6

The RC-6 is a very simple device, controlled by just a button and a switch. Make sure the drive mode is set to remote control. Aim the small black arrow in the silver circle at the camera and press the button to fire the shutter. A switch on the back gives the option of immediate firing (‘•’), or firing with a 2-second delay.

Line of sight

Infrared devices normally need to see each other – often known as ‘line-of-sight’. Based on this, it would seem that you can only use the RC-6 from in front of the camera, and you will find this quoted in some reviews. But it’s not strictly true. If you hold the RC-6 a few inches above the shutter release, aiming down, the shutter will fire when you press the remote button – useful as an alternative to a remote switch. It will even operate from behind the camera if the infrared beam is reflected back from a nearby surface.

When aimed from the front of the camera the range is given as 5 metres, though this will vary with the surroundings.

Infrared devices can be affected by fluorescent lighting, but we have not experienced any problems.

Recording movies

You can use the RC-6 to start and stop
movie recording on the EOS 60D. As with all uses of the RC-6, make sure that the drive mode is set to one of the remote shooting options (there are two options available in the EOS 60D – it doesn’t matter which you choose).

Set the switch on the RC-6 to ‘2’. When you press the RC-6 button the recording will start immediately. Pressing the button again will stop the recording. If the switch is set to ‘•’, pressing the RC-6 button will take a still photo.

This is a great little feature which we hope will be included in new EOS models.

Bulb mode

If you shoot in bulb mode, pressing the camera shutter button opens the shutter. It stays open for as long as you hold the button down – not very convenient for exposure times of more than a few seconds.

A remote switch is better. You can press and lock the remote button so that you can move away from the camera while the exposure is in progress.

But best of all is the RC-6. Press the button on the remote control unit to open the shutter, press it again to close the shutter. If you have the remote control set to 2-second delay, there will be a 2-second delay before the shutter first opens. During the exposure a timer displays the time elapsed on the LCD screen. If you have a camera compatible with the RC-6, using this technique is much easier than attaching a cable to the remote socket.

Bulbtimer
Above Elapsed time display during bulb exposure (shown on the top LCD of some models).

Self portraits

An obvious use for the RC-6 is for shooting self-portraits. Set One-shot mode. When you press to RC-6 button the camera will autofocus and then fire. However, if you do not want to include the RC-6 in the image, set the RC-6 switch to 2-second delay. Now when you fire the RC-6 at the camera you will have a couple of seconds to move the device out of the field-of-view before the picture is taken.

Other cameras

If you do not have one of the cameras compatible with the RC-6, what choices do you have?

Self portraits
For self-portraits you can use the self-timer mode, which is built into most models. When the self-timer is set (in the drive mode), pressing the shutter button starts the 2-second or 10-second timer (2-second delay not available on all models). This gives you time to move to the front of the camera. At the end of the period the shutter fires.
The advantage of the RC-6 is that you can fire the shutter when you are ready rather than waiting for the fixed delay to end.

Bulb exposures 
All EOS models have a remote socket, so you can use a thrid party remote switch to lock the shutter open during a long exposure.

Recording movies 
As far as we know, the RC-6 is the only device which will start and stop movie recording (currently only compatible with the EOS 60D).

Earlier remote controls

Also compatible with the above cameras are earlier versions – RC-1 and RC-5. The RC-1 offers the immediate and 2-second delay modes of the RC-6. The RC-5 only has the immediate firing mode.

Problems?
We regularly receive complaints about the RC-6 from photographers who say it is faulty. Generally it is not. Here are two things to check:

Drive mode 
The camera must be in the Self-timer/Remote Control mode for the RC-6 toSelftimerscreenoperate. Some cameras have more than one self-timer mode – you must use a mode with the symbol of a remote control unit. Pressing the shutter button in this mode gives you a 2 or 10-second self timer delay. Pressing the button on the RC-6 fires the shutter immediately (or with a 2-second delay).

Auto power
The RC-6 will only operate when the camera is switched on. If your camera automatically switches off after 30 seconds without use – one of the settings on the ‘Auto power off’ menu – it does not give Autopoweroffmuch time to move round to the front of the camera and fire. We set ‘Auto power off’ to ‘Off’ when using the RC-6 – the camera stays on until we turn the camera off. It’s a good idea to reset the ‘Auto power off’ to ‘1 minute’ or similar at other times to avoid draining the battery.


Monday, December 1, 2014

Avantech's & Canon's MCAST Art & Design collaboration

On Monday 17th November 2014, “Avantech” and “Canon”, as part of their collaboration with the Institute of Art & Design within MCAST, are sponsoring the Institute by donating the latest Canon photo video equipment – camera bodies, lenses and accessories, leading to the set-up of even better training facilities for students following courses in this field.

The Institute’s collaboration with Industry, namely Avantech and Canon ensure a steady stream of skilled and qualified employees into the workforce of this particular sector which is taught at MCAST Art & Design. Avantech sincerely believe that the provision of the Canon equipment will assist the students continue to excel in their chosen studies.

MCAST Art & Design was one of the first Institutes founded in 2001 when MCAST was founded and since then, it has been a growing success story which continues to develop new vocational education opportunities in 3D-Design,Fine Arts, Graphic Design, Interactive Media, Media (Moving Image), and Photography. The Institute is now venturing into areas of specialisation such as Game Graphics and Creative Mobile Technologies. The collaboration of the Institute with the local Industry, ever since its inception, have ensured an added opportunity for students to train for the real world of work.

Canon and Avantech are proud to be part of this success story that is MCAST.